Dishwasher repair in Toronto
If your dishwasher leaves standing water, leaks under the sink, or shows a Bosch E24 or LG error code, it is worth a same-day visit. We repair dishwashers from Bosch, Miele, KitchenAid, Samsung, LG, and GE in houses and condos across Toronto and the GTA. Typical repairs are drain pumps, wash motors, heating elements, and door seals — quoted before we start.
Problems we diagnose
- Not draining or leaving standing water
- Leaking from the door or under the unit
- Dishes still dirty or gritty
- Will not start or fill
- Bosch, LG, and Samsung error codes
Request a visit if you would like us to take a look. Same-day service is available when you call during hours. Diagnosis is applied to the repair when we complete the job.
How we can help
Dishwasher work is one of the most common kitchen calls for our mobile team. Bosch built-ins in condos, KitchenAid and GE units in houses, and Samsung and LG machines with drain codes are regular in-home visits. Call 416-800-9206, 905-963-0067, or 705-999-8533. We book same-day through 11pm weekdays and 10pm weekends.
Most dishwasher repairs in the GTA land between about $150 and $300 depending on the part. Drain pumps and wash motors are the usual jobs. We pull the kick plate, test the pump, check the air gap or high loop, and quote before we order anything you have not approved.
Diagnosis is applied to the repair when we complete the job. Completed work includes a 3-month service warranty.
Common problems we see
Bosch E24, E25, and standing water
E24 is a drain error: a clogged or kinked hose, a blocked filter, or a failing drain pump. E25 points at the pump itself. We have a full Bosch error-code guide on this site. On the visit we pull the filter, check the hose behind the unit — condo installs are often crushed — and replace the pump when that is the fault, rather than only clearing the code.
LG OE and Samsung drain codes
LG OE and Samsung 4C, 5C, or OC codes are drain or leak-sensor faults. Food soil in the chopper, a failed pump, or a wet base that has tripped the float will stop the cycle. We dry the base, test the float, and quote the pump or the hose. See our LG and Samsung dishwasher error-code pages if you already have the letters on the display.
Leak at the door or under the sink
A torn door gasket, a loose inlet, or a cracked tub sump will wet the floor and the cabinet. We run a flood test with the kick plate off so we can see the path. Cabinet damage is on the homeowner to dry; we stop the leak and tell you if the particle board is already swollen.
Dishes come out gritty or still dirty
That is often a weak wash motor, a clogged spray arm, a failed heating element, or hard-water soil on the filter — not the detergent. We spin the arms, check the heater, and test the motor. If the tub is heavily scaled, we will say so. A new pump will not fix a machine that has never had the filter cleaned.
Will not start, fill, or the door will not latch
Door latches and control boards fail, especially after a child leans on the door. We test the latch, the flood float, and the inlet valve. A latch is often same-day. A board is quoted with the part number before we order.
What to expect on the visit
Photograph the model sticker on the door edge and the error code. Clear the area under the sink so we can see the drain hose and the air gap. In a condo, tell us if the unit is in a galley kitchen with no side access.
We run a drain and fill test, check the high loop, and pull the unit only if the hose or the motor needs it. If the pump is on the truck, many jobs finish on the first visit.
Cost and when to repair or replace
Most dishwasher repairs we complete land about $150–$300. That is a typical pump, latch, or element job after diagnosis is applied to the completed repair — not a menu price. A control board or a Miele-specific part can run higher and is quoted on site.
A dishwasher older than about 10 years that needs a board or a second major part is often cheaper to replace than to keep repairing. New units commonly run $700–$1,700. We will say so when replacement is the better choice for your home.
| Repair | Replace |
|---|---|
| Most dishwasher repairs in the GTA land between about $150 and $300 depending on the part. Drain and pump jobs are the most common. | A dishwasher older than about 10 years that needs a control board or repeated visits is often cheaper to replace ($700–$1,700 for a new unit) than to keep repairing. |
Brands we service
Bosch, Miele, KitchenAid, Samsung, LG, GE, Whirlpool, and Fisher & Paykel drawer dishwashers are all on the schedule. Premium European parts can take longer to arrive; you hear that before we start.
Use the Bosch, LG, and Samsung error-code guides on this site if the display is already flashing. Bring the code to the booking so we can load the likely pump.
Related pages
3-month service warranty.
What homeowners say
“Edi phoned to let me know what time he expected to arrive and was on time. He repaired our dishwasher quickly and efficiently, explained what was wrong, and kept me informed throughout.”
“My 7-year-old washer was not draining. Edward arrived within two hours, found a failed drain pump, and repaired it the same day. Professional diagnosis and a fair price.”
Frequently asked questions
Serving Toronto and the GTA. See all service areas or the appliance repair hub.
Need help with an appliance today?
Call us or send the form. Our team books evenings and weekends across Toronto and the GTA.