Washer repair in Markham

Problems we diagnose

• Washer not draining or spinning
• Leaking from the door gasket or pump
• Will not start or door will not unlock
• Loud grinding or banging in spin
• Drain and lock error codes on the display

How we can help

We come to your home for washing machines repair in Markham. Townhouse closets are tight. We need to know if the pair is stacked when you book. Call 905-963-0067, or 416-800-9206 in Toronto. Hours are 7am–11pm on weekdays and 7am–10pm on weekends.

We test the machine where it sits and tell you which part failed, in plain words. You approve the parts-and-labour price before we start. We repair that part. We do not replace the control board, the computer that runs the cycle, unless the test shows it is the fault.

If you book the repair, the diagnosis fee is applied to the job. Finished work includes a 3-month warranty. If the quote is close to the price of a new machine, we say so before you approve.

Common problems we see

• Will not drain — standing water in the drum

  A clogged pump filter, a failed drain pump, or a kinked standpipe hose leaves a tub full of dirty water. Coins, hairpins, and sock lint kill pumps. We empty the drum safely, pull the filter, and replace the pump on the visit when the part is on the truck. We also check the building drain so we are not blaming the washer for a blocked stack.

• Door will not unlock or the cycle will not start

  Front-load door locks fail often in Markham, especially on busy laundry weeks. The machine may finish the wash and then hold the door shut, or it may refuse to start and show a lock code. We test the lock, the latch, and the board output. A lock is usually a same-day swap.

• Loud grinding or walking across the floor in spin

  Grinding that gets worse in a fast spin is usually the tub bearings, or the spider, the support behind the drum on a front-load washer. A top-load washer that walks across the floor often has a broken suspension rod. Bearing jobs take more labour. We quote the hours in plain words and will recommend a new washer if the tub is not worth the time.

• Leaks at the door, the pump, or the inlet

  Door-boot mould and tears on front-loads drip onto the floor. Pump housings crack. Inlet valves weep behind the machine and rot the subfloor. We find the wet path, replace the boot or valve, and check the levelling feet so the door gasket seats again.

• Stacked condo laundry closets

  Closet stacks in Markham leave almost no room to pull a washer. We work from the front, protect the hallway, and follow the building’s quiet hours. Tell us the stack brand and whether the dryer sits on a kit so we bring the right tools.

What to expect on the visit

1. 1

   Tell us the brand, what the machine is doing, and whether laundry is in a closet or a basement in Markham. A photo of the model sticker helps us load the likely part.

2. 2

   On site we unplug, test with a meter, and pull the unit only as far as the job needs. If the part is on the truck, we finish that day. If it is special-order, you hear the lead time and the price before we leave.

Cost and when to repair or replace

Many washer repairs land under $200 in parts and labour when the fault is a pump, lock, or valve. Diagnosis is credited when we complete the job. Bearing and tub jobs are quoted with labour hours in plain language.

If the quote approaches a new laundry pair on an older front-load with a failed spider, we say replace. Two paid visits on the same bearing noise without a lasting fix is usually the point to stop.

Brands we service

We regularly service Samsung, LG, Whirlpool, KitchenAid, GE, Bosch, and Miele in condos and houses. If we cannot get the part, we say so before we start.

Use the brands list, or call 905-963-0067 with the model number. We do not treat every error code as a new control board.